Before you begin installing a 2 post car lift, it is important to know how thick the concrete floor must be and where the lifting points are. You should also use a wheels-free jack and identify the lifting points. This article will provide totally free tips on installing a 2-post lift. In addition, you’ll learn how to install a concrete floor column. Here are some steps you should follow.

Installation of a 2 post car lift

In order to install a 2-post car lift on a concrete floor, you must have a concrete floor that is strong enough to support the columns of the car lift. Typically, manufacturers recommend a concrete floor with a minimum PSI of 3000 and a depth of 6 to 12 inches. You should also adhere to all other requirements of the concrete slab. Before you begin installing your 2-post car lift, read the instructions carefully.

Make sure that the garage floor is level. You will need to level the garage floor, if it is concrete. In addition, the garage floor should be clean and free of cracks. You should also prepare a clean area for the installation process. After the car is clean and dry, you will need to install the lift. You must make sure that there is sufficient space around the lift. You should install the lift at least 13 feet away from the back door. This will allow enough space to drive the car in and out of the shop and will prevent the car from sticking out the back door.

Concrete floor thickness

When installing a two post car lift, the concrete floor must be thick enough to hold the columns and support the weight of the car lift. Most manufacturers recommend a minimum thickness of six to twelve inches and a PSI of three thousand. This thickness should be followed exactly. Then, if possible, you should spread rebar wiring on the bottom of the form. Once this is done, the car lift is ready to use!

To install a 2-post or 4-post car lift, the ceiling must be at least 11 feet high. Regardless of the brand or model, a floor with less than 11 feet high is not ANSI-certified for these lifts. In addition, the concrete patio slab should be at least four inches thick and have a minimum compressive strength of three thousand pounds. If the height of the concrete slab is lower than that, it is likely overkill.

Identifying lifting points

When you decide to install a two-post car lift, you will want to take into consideration several factors. For example, how much space do you have in your garage? What height is the ceiling? Do you have enough space in front of columns? The exact placement of lifting points will determine how well the lift functions. Identifying these points will ensure that the lift is safe and that there are no other objects on the floor that could cause it to fall.

In addition to measuring the center of gravity of your car, you will need to identify the lifting points on your car. You can check the owner’s manual or call the maker’s customer service line for a detailed list. In addition to manuals, the internet has an abundance of information on the subject. The key is to know what to look for before you purchase a 2 post lift.

Using a wheels free jack

Using a wheels free jack to set up a 2 post car lift requires you to have a sturdy concrete floor to work on. You will need to dig holes that are two feet wide by one foot deep. You can either drill holes into the concrete or use an air compressor to add air to the concrete. You must make sure that the lift is level before you begin.

The floor should be thick enough to support the columns. Most manufacturers recommend a minimum of four inches of concrete depth and three thousand pounds of PSI. The depth of the slab is dependent on the type of lift you are planning to install. Usually, four inches of concrete is enough for a two-post lift, but a four-post car lift requires more concrete.

Hiring a professional

If you’re thinking of installing a car lift, you may be wondering how much it will cost to have a professional install it. While it may be more of an investment, the extra storage space and workspace it can give you are well worth the price. Here’s how to find out if you can install a 2 post car lift on concrete floors yourself.

The type of lift you need depends on several factors, including the type of vehicles you intend to work on, where you want to install it, and how often you plan to use it. Some premium manufacturers of car lifts include Challenger, ATLAS, Dannmar, Ideal, LaunchTech USA, and Tuxedo. If your floor is concrete, make sure to choose a clear-floor model that won’t scratch it.